EnergyPerformance.homes
The Hearth Record
Home / File 07 - Solar panels and storage / Guide

Solar and a Heat Pump Together

How rooftop solar and a heat pump interact: daytime running, self-consumption, controls and why the combination needs joint sizing. Educational only, not advice for a particular home.

Published 26 October 2026Evidence checked on 26 October 2026General homes, EU and UK systems kept separate

The short answer

Solar panels and a heat pump can complement each other, but they do not automatically cooperate. Panels produce most in summer, when heating demand is lowest, while heat pumps need most electricity in winter, when panels produce least. The overlap is strongest in spring and autumn, for hot water, and for homes where someone is home during the day, and the system design should be honest about that seasonal mismatch rather than implying solar powers winter heating outright.

Where the combination helps most is in shifting flexible loads into solar hours: heating a cylinder, pre-warming a well-insulated home or charging a battery during the day, then drawing on that stored heat or electricity in the evening. Controls that link the heat pump to solar surplus make that shift possible, but they need to be designed as one system.

What it means in practice

Joint sizing starts from both loads at once: the heat pump heat loss and hot water demand, and the solar production pattern across months. A heat pump sized for a cold January night and panels sized for a bright June day are sized for different worlds, and the financial case should model them together, month by month, rather than adding two separate annual claims.

Controls are the link. Some heat pumps accept a solar surplus signal and raise cylinder temperature or room temperature slightly during surplus hours, storing heat in water or fabric. That strategy only works if the home can absorb the extra heat without overheating, and if the control does not fight the weather compensation curve that normally governs the heat pump.

Checks before you act

Check the household pattern first: who is home during the day, when hot water is used, and whether the heat pump can be scheduled to favour daytime operation without losing comfort. Ask for a combined monthly model showing solar production, heat pump electricity use, self-consumption and grid imports, with and without a battery.

Also check the electrical capacity: a heat pump, an inverter and a battery charger together may need a supply upgrade or a load management device, and the network operator may need to approve the combined export and import arrangement.

How this differs by place

In the EU, combined solar and heat pump systems are treated under national building and support rules, and member states differ on whether the combination earns additional support, how self-consumption is metered and whether heat pump electricity can be separately tariffed. Those rules change the economics more than the technology does.

In the UK, MCS covers both technologies, and the Smart Export Guarantee governs export payment, while heat pump running costs depend on the electricity tariff, including any time-of-use option. Devolved support schemes and planning rules add local differences that should be checked for the property.

Mistakes that waste money or time

A frequent mistake is buying panels to run a heat pump in winter and then being surprised by January imports, because the seasonal mismatch was never modelled. Another is letting the heat pump and the solar inverter operate as strangers, with no surplus control, so solar exports at a low value while the heat pump later imports at a high price.

A third mistake is overheating a home to store solar heat, by pushing room temperatures well above comfort during surplus hours. A modest pre-warm is useful; a sauna is not, and the control settings should reflect that distinction. It also helps to agree who is responsible for the combined controls, because a solar installer and a heat pump installer can each assume the other has set the surplus signal correctly, and a written note naming the party who commissions the link prevents the most common cause of a combined system that never actually cooperates.

Evidence to keep, and what to ask

Keep the combined monthly model, the control settings for surplus operation, the heat pump and inverter data sheets, the network approval and the export tariff terms. Those papers let a later installer see how the two systems were intended to interact.

Ask a qualified installer: how much heat pump electricity will solar cover month by month, how does surplus control work on this combination, and what happens on a cloudy winter day. Monthly, combined answers are the test.

Sources and evidence on the record

Evidence basis: Educational guidance drawn from the official sources listed below; a home-specific assessment is still needed before any work, and no outcome is promised. Applies when: You want to understand solar and heat pump combinations in general before planning either

Next on the file

File 07 - Solar panels and storage Solar Panels and Storage, Explained A starting map for rooftop solar and home storage: how panels, inverters, batteries and export fit together, and which questions to settle first. Educational only, not advice for a particular home. File 07 - Solar panels and storage Solar Thermal Water Heating How solar thermal collectors heat water directly, how they differ from solar PV, and where they still make sense alongside other systems. Educational only, not advice for a particular home. File 07 - Solar panels and storage Solar Maintenance and Monitoring How to look after rooftop solar: monitoring output, cleaning, inverter checks, bird and vegetation issues, and when to call a professional. Educational only, not advice for a particular home.